This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
Everyone is stocked with the 18 sound 15NLW9401 8OHM, directly from Xmax! covered, from a batch. The choice fell on this chassis because they represent a good tonal compromise from "crisp" and "round" in both possible operating modes. Enough stroke and depth in the ported fashion, enough punch and membrane control in the FLH fashion. All chassis are both optically and technically in perfect condition! (Membrane stable and harmless, born undamaged and in zero, neither mechanically nor thermally overloaded thanks to sufficient use of material and conservative limiting. ). All housings are technically flawless, CNC made of 15mm birch multiplex, waterproof glued with PU glue, painted with warning. (Please refer to the manufacturer's website). Visually, all housings have inevitable signs of wear, of course, but were only used and handled, i. e. , no dryhire, no hands, no abuse. If necessary and acceptance of all speakers, I can also refresh the optically before handing over:). The "highlight" of these bass horns are the 2 different possible inserts (photo) that either ventilate, with a corresponding higher acoustic output under the horn cutoff, or close, with a correspondingly lower lUUMP, but higher impulses and higher upper separation frequency. Ported mode, BW24 40Hz, LR24 110Hz, see photo (can be "thickened" if necessary and enough material via EQ on the tuning. ). FLH-Mode, BW24 60Hz, LR24 110Hz, see photo (can also be separated higher if necessary. ). -Each bass horn comes with both the ported aperture and the modified FLH aperture! (see photos). - If there are 4 pieces (minimum acceptance quantity), there are 2x suitable roller boards (see photos). - If all bass horns are accepted, transport/handover would also be negotiable as well as a visual refreshment.