Sound Projects - SPX90
Sound Projects - SPX90
Sound Projects - SPX90
  • Load image into Gallery viewer, Sound Projects - SPX90
  • Load image into Gallery viewer, Sound Projects - SPX90
  • Load image into Gallery viewer, Sound Projects - SPX90

Sound Projects - SPX90

Vendor
Stage Experts Ltd
Regular price
€1,100.00 (ex.Vat)
Sale price
€1,100.00 (ex.Vat)
Regular price
€1,320.00 (inc.Vat)
Sold out
Unit price
per 
We have 4 in stock.
Shipping cost to be calculated.

This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.

Used - Sound Projects - SPX90
The sound reinforcement system shall hold a light 12-inch driver equipped with a 3 inch voice coil. The 2,5” coil HF driver shall be loaded by a free rotatable horn to allow both horizontal and vertical placement of the cabinet. Both drivers shall have a neodymium magnet assembly. The system shall contain a 700W sine wave LF amplifier and a 300W sine wave HF amplifier with dedicated band pass filters and speaker management systems. The system shall have a dispersion of 90 degrees horizontal and 60 degrees vertical and a 60Hz-20kHz frequency range. The maximum peak output of the total system shall be 134dB at 1m.
The cabinet shall be constructed of cross grain laminated multiplex, covered by a protective 2 component polyurethane coating. The total system weight including amplifiers and audio control shall be 32 kg only. It shall have an IEC XLR-3 audio in and output connector and a powercon in and thru mains connector.
The system shall be a self-powered design holding its own protective audio logic control electronics and amplifiers within the cabinet.
Drivers: 1 x 2,5” HF, 1 x 12"LF, High Power low weight Neodymium design.
Freq. response: 60Hz-20kHz
Max. peak SPL @1m: 134dB, Crest factor 2 (6 dB)
Coverage angle: 90H x 60V (rotatable)
Amplifier(s): CCD™ technology
Output: 1200W sine total (DALC limited)
Crossover: 1 kHz, 4th order
Filter subsonic: 60Hz, 2nd order
Input impedance: 20 kOhms balanced, 10 kOhms unbalanced
Output impedance: hard-wired to input
Mains voltage: 230V (other on request)
Mains frequency: 50/60 Hz
Idle: < 50VA
Full load: 1200 VA. DALC limited Ref. to continuous pink noise signal (6 dB crest factor within the specified range)
D.A.L.C. (Dual AudioLogic Control)
Protection threshold: +4dBU
Transient (soft power-up)
DC-voltage short-circuit
LED indication: power-on/signal/protect
Cabinet construction: cross grain laminated multiplex
Finish: Nano-armor™ coating
Weight: 32 kg
Size WxHxD (mm): 395x600x405 (trapezoid)
Rigging points: Integrated SPX flypoints, recessed polemount.
Audio connectors: IEC XLR-3 in/out
Main connectors: powercon in, powercon out
Max. operating temp.: -10 to 40 C ambient