This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
Used - Sound Projects - SPX60Flightcase: Not included
Accessories: None
The sound reinforcement system shall hold one low-weight neodymium 12-inch driver and a 1.4” HF driver loaded by a free rotatable horn to allow both horizontal and vertical placement of the cabinet. The system shall have horizontal dispersion of 60 degrees and a vertical dispersion of 40 degrees. The system shall contain two 500W amplifiers with dedicated band pass filters and speaker management system. The maximum peak output of the total system shall be 134dB at 1m. The syste¬m shall have a 60Hz-20kHz frequency range.
The cabinet shall be constructed of cross grain laminated multiplex, covered by a protective 2 component polyurethane coating. The total system weight including amplifiers and audio control shall be 32 kg only. It shall have an IEC XLR-3 audio in and output connector and a powercon in and thru mains connector.
The system shall be a self-powered design holding its own protective audio logic control electronics and amplifiers within the cabinet.
Drivers: 1 x 1.4”, 1 x 12" High Power low weight Neodymium design.
Freq. response: 60Hz-20kHz
Max. peak SPL @1m: 134dB, crest factor 2 (6 dB)
Coverage angle: 60H x 40V (rotatable)
Amplifier(s): MA1000™ technology
Output: 1000W sine (DALC limited)
Crossover: 1 kHz, 4th order
Filter subsonic: 60Hz, 2nd order
Input impedance: 20 kOhms balanced, 10 kOhms unbalanced
Output impedance: hard-wired to input
Mains voltage: 230V (other on request)
Mains frequency: 50/60 Hz
Idle: < 50VA
Full load: 300 VA. DALC limited Ref. to continuous pink noise signal (6 dB crest factor within the specified range)
D.A.L.C. (Dual AudioLogic Control)
Protection threshold: +4dBU
Transient (soft power-up)
DC-voltage short-circuit
LED indication: power-on/signal/protect
Cabinet construction: cross grain laminated multiplex
Finish: Nano-armor™ coating
Weight: 32 kg
Size WxHxD (mm): 395x600x405 (trapezoid)
Rigging points: Integrated SPX flypoints, recessed polemount.
Audio connectors: IEC XLR-3 in/out
Main connectors: powercon in, powercon out
Max. operating temp.: -10 to 40 C ambient