This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
For sale is here. By using LCO2, the Coldflow device is far more efficient than conventional means to produce deep fog. The device uses the LCO2 to produce dry ice in an aluminum chamber. You can then use your Rosco model 1600, 1700, 1900, Delta 3000 (or almost any other fog machine) and guide the fog through the cooling chamber. The fog is cooled under the ambient temperature and hugs the floor. It is generally known that the better the fog is the better. Therefore, you can achieve a great effect if you expose the fog of the low temperature of dry ice. Coldflow eliminates all problems associated with the use of commercial dry ice. These problems include the search for a source, transport, handling, storage and the need to limit the fog to short effects. Liquid carbon dioxide can be found almost everywhere. It is easy to use and does not require any special storage. While 22 kg of dry ice in hot water ensure a 15-minute effect, a comparable tank with LCO2 is enough for up to 2 hours. The best results are achieved when the Rosco Coldflow is used with any rosco fog machine and Rosco Stage & Studio Fog Fluid. Stage & Studio was specially developed to create fog that is deeper and accepts the lower temperatures and other changes that are generated by the cold flow. A remote control supplied as standard activates Coldflow. The remote control has three easy -to -read LEDs. One of these ads is used for switching on and off, the second lights up while the device cools down (about ten minutes), and a third indicates when Coldflow is ready for operation. A 2. 1 meter long metal hose is connected to the device, with which the Coldflow can be connected to an LCO2 tank. The efficient way of creating deep fog if necessary. More efficient than conventional means. Can be used with almost any fog machine. Light manipulation. Including remote control. The Rosco Cold Flow is an accessories for standard fog machines that convert liquid carbon dioxide (LCO2) into dry ice. The dry ice cools down a uniquely designed aluminum profile, which is able to transform large amounts of fog into thick, deep fog. The device can create a wide range of deep fog effects, from a continuous layer to a gigantic cloudburst. Coldflow, here in conjunction with a Rosco fog machine model 1600, generates quick, efficient and continuously deep fog. A 22 kilos of LCO2 cylinder, such as the one shown here, generates up to 2 hours of constant lever in this application. Electricity claims: 100/120 volt, 50/60 Hz, 0. 5 amps. 200/240 volts, 50/60 Hz, 0. 25 amps. Dimensions: 22 inches x 12. 5 inches x 12 inches. (56 cm x 32 cm x 31 cm). Weight: 40 LB, 18 kg. Fuse type: 120 volt-2550 volt/1 ampere (5mm x 20mm). 240 volt-2550 volt/0. 5 amps (5 mm x 20 mm).