This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
Used | Martin - Exterior 400 Image ProjectorNarrow 16°
The Exterior 400 Image Projector is a powerful tool for integrating textures, patterns and graphics in outdoor lighting designs. At over 7000 lumens, the fixture can be used for bright and dynamic logo projection, as well as precision framing.
Using advanced LED technology, the Exterior 400 Image Projector stands apart for its energy efficiency, compact size and incredible design flexibility.
Bright and dynamic outdoor gobo projection
Very high efficacy
Great artistic freedom with up to 6 customizable gobos and 8 custom colors
Bright and energy efficient LED projection (+7000 lumens)
Up to six customizable gobos (two included with fixture)
Up to eight customizable colors (blue and orange included with fixture)
Rugged IP65 housing
Narrow, medium and wide beam angle options
Pre-programmable effects, such as: continuous image rotation, color scrolling, focus, dimming
Length: 425 mm (16.8 in.) including cable gland
Width: 307 mm (12.1 in.) including mounting yoke
Height: 421 mm (16.6 in.) including mounting yoke
Weight: 15 kg (33.1 lbs.)
Color wheel: 8 interchangeable dichroic filters + open, full and split colors, continuous rotation, random color
Rotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shake
Motorized iris: 0 - 100%, pulse effects
Motorized focus: Approx. 2 m to infinity
Electronic dimming: 0 - 100% continuous dimming
Electronic 'shutter' effect: Strobe, pulse and sinewave intensity modulation effects
Pre-programmed effects: Varied macro effects available in stand-alone mode
See Included Items for details of gobos and color filters supplied as standard
Control options: DMX, stand-alone, synchronized (master/slave)
RDM (Remote Device Management): Implemented
DMX channels: 9
DMX address setting: PC with Martin MUM™ software and DABS1™ Interface Box, RDM
Stand-alone trigger options: Internal timer, including 24-hour clock
Stand-alone (single fixture and/or synchronized) programming: PC with
Martin MUM™ software and DABS1™ hardware interface
Stand-alone program capacity: Up to 100 scenes
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Receiver: RS-485Firmware update: Serial upload via DMX link
Light source: 7 x Luminus CBT-90 (50 W) LEDs
White LED: 6500 K
Minimum LED lifetime: 60 000 hours (to >70% luminous output)
**Figure obtained under manufacturer's test conditions
Color: Clear anodized, white, custom colors to special order
Housing: Anodized aluminum
Mounting bracket: 8 mm (0.32 in.) anodized aluminum
Front glass: 6 mm (0.24 in.) anti-reflection coated
Protection rating: IP65
Outside diameter: 27.9 mm +0/- 0.3 mm (1.1 in +0/-0.012 in.)
Maximum image diameter: 23 mm (0.91 in.)
Maximum thickness: 1.8 mm (0.07 in.)
Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminum coating
Recommended metal: Aluminum (steel for temporary use only)
Orientation: Any
Mounting: Flat surface at any angle, pedestal or other suitable support
Vertical aiming: 330°Minimum distance to illuminated surfaces: 0.5 m (1.7 ft.)
Power connection: 1.8 m (5.9 ft.) cable tail
Power cable entry: IP68 cable gland
Data connection: 1.8 m (5.9 ft.) combined input + output cable tail
Data cable entry: IP68 cable gland
ALAC power: 100-240 V nominal, 50/60 Hz
Typical power consumption, all effects static, zero light output: 13 W
Power supply unit: Integrated, auto-sensing multi-voltage