This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
The Laserworld RS-1000 RGB is a powerful show laser and, due to its versatility, suitable for any purpose. With the simple and clearly kept menu, the RS-1000 RGB can be configured in no time and can not only operate in the automatic mode, but also music, DMX 512 and ILDA-controlled. The laser's scansafy technology ensures the switch-off of the device when the scanner deviates and thus provides an extra safety. Due to its precision, the laser, in addition to spectular sea effects, also represents human silo meals without any problems and thus sets up the "icing on the cake" of every light show. A real eye -catcher who will enrich your events in every way. Condition: very well maintained. Due to transportation in the case and little use, only small signs of wear such as small scratches, light abrasion/ discoloration,. Case outside with clearly visible signs of wear, such as small dents, scratches, abrasion,. delivery scope: laser. Mounted scansafety board. Key for the main switch. Bridge connector for remote control switch. Operating instructions for lasers. Operating instructions for integrated scanner set. Operating instructions for integrated Ilda Safety Card. Suitable tour case with rollers. The Safety Wire rope shown is not included. Technical data: Laser: Laser sources: air -cooled DPSS laser (green) diode laser (blue at RGB, red in RGB and RGY models). Performance (on the laser): min. 750mw, max 1000mw, > 200MW 532nm green, > 300mw 655nm red, > 250mw 445NM blue. Laser class: 4. Operating modes: Ilda, DMX 512, automatic mode, music mode. Ilda: 25pin Ilda Standard Sub-D Shaped 25pin Connector. Galvosystem: - 50K scanning speed (at 5 °). - Maximum AblenkkkinkeLele: 60 °. DMX 512: 14 channels. Basism: 160 (levels, grids, tunnels, wave effects, writings, graphics, animations). Retiring steering: Max. 60 ° Visual. Ray data: approx. 3mm/1mrad. Accessories: power cables, key switches, interlock adapter, instructions, assembly material. The delivery takes place in the flight case. Power supply: 220 ~ 240V AC 50/60 Hz, or 110-120V 50/60 Hz, swit. Electricity recording: 120W. Dimensions: 550 x 320 x 310 mm (W x D x H). Weight: 15kg laser, total: 28kg (with flight case). Operating temperature: 10 ° -35 ° C. Noise development: <70db. ILDA Safety Card: Tension +/- 24 V. Intub Delivery Laser: 10 seconds. Section time when deviation is about 40ms.