This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
We separate ourselves from our KME power amplifier. The set consists of 6 AMP DA230, a 32A distribution KME, a connection panel from KME and a DD Rack 14ha with rollers. Optics see photos. Technical data. Max. Output power @ 4 /8 ohm 2x 1500/700 W. Frequency response 20 Hz - 20 kHz. Signal / noise ratio (A-rated / unknown) 100/95 db. Input sensitivity for full modification analogous to 0 dB (775 mv) / digital -12 dbfs / without filter in the output channel. Survey damping @ 1 kHz> 90 db. Damping factor @ 1 kHz> 500. Voltage reinforcement @ 4 /8. Equipment (electronic) per channel: gain, digital crossover, subsonic filter, parametric EQs, dynamic processor, polarity, delay, matrix router. Protection circuit for individual channels: short circuit, DC voltage at the output, impedance underray;For the entire device: sub/ overvoltage, over temperature, overload. Max. Performance consumption 2600 W. Power supply 90 - 250 - 60 - 60 Hz, PowerCon input. Operating modes stereo, mono, 2-channel (free Routbar). Controls ground-free switch, navigation pad, 4x rotary control with print function, 4x RGB LEDs, LCD graphics display, SD card slot. Connections line-in 2x XLR, link-out 2x XLR electronically symmetrated (max. 2x analog or 1x digital & 1x analog);Loudspeaker output 2x Speakon NL4;RSNC module. DSP 24 bit, 48 MHz clocked. Basic delay <1. 5 ms. Sampling 24 bit. Digital input & link inputs: AES/EBU & S/PDIF with format/samplerate converter (up to max. 192 kHz), link: Like input format/24 bit, 48 kHz, aes/ebu. Storage places internally: 12 presets, more presets possible on SD card. Dimensions (W x H x D) 483 x 88 x 375 mm (2 H). Weight 9 kg. We also have suitable tops and sub from KME. Please take a look into the end -speaking articles. Selling only to business! Shipping by forwarding possible! .