This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
ElectroVoice CPS 4.5 500 W/CH 4‑CH AmplifierIncludes RCM-810 option card.
The Electro-Voice CPS4.5 amplifier offers four independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 500 Watts into Low-Z or High-Z loads. Per default, each channel can be configured individually for max. power output into either 2 Ω, 4 Ω, 70V- or 100Vnetworks without involvement of any output transformers. Being designed for professional audio installation market, special care was taken for long term cost of ownership parameters: In addition to remarkably low current consumption and heat dissipation, the CPS4.5 provides remote standby switching with just 5 Watts consumption in standby mode.
An optional remote control module RCM-810 (installed) provides control and supervision features via IRIS-Net, including monitoring of amplifier status and real time load supervision. In addition, via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 Ω and 10 Ω, in steps of 0.1 Ω.
Features :
Four channels in one compact rack-efficient unit
500 W per channel
70/100 V operation for distributed systems
Class-D design for optimum efficiency
Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
IRIS-Net selection of each channel’s impedance (2-10 Ω in 0.1 Ω steps)
Rear-mounted attenuators
Switchable 50 Hz high-pass filter (Hi-Z mode)
Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
Phoenix-type input and output connections
Remote power-on/off contact
Programmable power-on delay settings
Front-to-rear fans
Specifications :
Network Control (IRIS-Net) & CAN Bus Interface : RCM-810 card installed
Frequency Response (-3 dB) : 15 Hz-30 kHz
Impedance : 2/4/8/8 VLD/70 V/100VΩ
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v : 450Watts
Electronics Type : Amplifier
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v : 450Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω : 500Watts
Analog Inputs : 4, electronically balanced, Phoenix-type
Continuous Rated Power (1 kHz, THD 1%) 8Ω : 250Watts
Maximum Input Voltage : +22 (9.76 Vrms)
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω : 225Watts
Maximum Bridged Output 8Ω : 1000Watts
Mains Voltage : 220 – 240 V, 50 – 60 Hz or 120 V, 50 – 60 Hz, 50 – 60 Hz
Maximum Bridged Output 4Ω : 1000Watts
Total Harmonic Distortion : 0.05%
Cooling : Front-to-Rear, continuously variable fans
Slew Rate : 28V/µs
Audio Network : No
Intermodulation Distortion (SMPTE) : 0.05%
Variable Load Drive (VLD) : Yes
DIM 30 : 0.02%
Topology : Class-D
Signal-to-Noise Ratio (A-weighted) : 100dB
Input Impedance (Balanced) : 20kΩ
Input Sensitivity : 0 dBu (.775V)-2ω, +3 dBu (1.1V)-4/8ω, +6 dBu (1.55) 70V/100V
Continuous Rated Power (1 kHz, THD 1%) 4Ω : 500Watts
Amplifier Gain : 32 dB (Lo-Z), 33 dB (70V), 36dB ((100V))
Continuous Rated Power (1 kHz, THD 1%) 100v : 500Watts
Continuous Rated Power (1 kHz, THD 1%) 70v : 500Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω : 450Watts