This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
Used loudspeakers, slight signs of wear, from non -smoking environment. A tweeter has a small dent, but works without restrictions! Note: In another advertisement, I also offer a sub-base Dynaudio Air Base 12. Features. 10 "Molded Woofer, Polypropylene Cone W/ 3" Pure Aluminum Voice Coil. 5. 5 "Molded Polypropylene Cone, Pure Aluminum Voice Coil. 1. 1" Soft Dome Tweeter, Rear Chamber Magnetic Fluid, Pure Aluminum Voice Coil. 192 KHz support via dual wire. The New 221 (Two-to-One) Design-Integrating Unique Tweeter and Midrange Technology. Bass management, with selectable frequency crossover points. Advanced bass management. Acoustic Placement Compensation. Preset Storage and Recallprogrammable Reference Levels. Level alignment in 0. 1 db steps. All monitors aligned within +/- 0. 2 db precision. Integrated Parametric EQs and Delay in Each Monitor (ONLY Accessible with PC-IP). Central and Remote Control of System and Parameters. Direct digital inputs and analog inputs (optional). Networking In-Between All Air Components. Dedicated air base subwoofers. Two Times 200-Watt AMP Package in Each Monitor. Model: Air 20. System: Three Way Active Monitoring System. Frequency Response (+/- 3 db): 31 Hz –22 KHz: +/- 3 db. Peak SPL 1M, pair (iec short term)> 131 dB peak. Peak SPL 2m, 5. 1 (IEC Short Term)> 129 dB Peak. Max SPL 1M, (IEC Long Term) 104 dB RMS. Precision of Monitor Matching: +/- 0. 2 db. Port Tuning Frequency: 40 Hz. Internal Cabinet Volume: 35 Lites. Bass Principle: Bass Reflex. Crossover Frequency: 390 Hz (DSP Generated) and 2600 Hz. Crossover Slope: 12 dB/OCT and 6 DB/OCT. Tweeter: Esotar 28 mm / 1. 1 ”Soft Dome, Neodymium Magnet, Rear Chamber, Magnetic Fluid, 4mm Alu Front, Pure Alu Wire Voice Coil. Mids: 145 mm / 5. 5", One-Piece Molded Polypropylene Cone, 38 mm /. Woofer: 240 mm /9. 5 ", One-Piece Molded Polypropylene Cone, 100 mm /. Main Voltage: 100 to 240 VAC, 50 HZ (Auto-Select). Power Consumtion: 45 W @ 1/8 Max Power (IEC 60065). Baffle. Weight: 28 kg / 62. 2 lbs. Tweeter, Midrange and Woofer. Tweeter & Midrange 200 W amp/Woofer 200 W amp. Typical Listening Space: 1. 5-3 m / 5-10. 2 Ft. Internal Sample Rate: 192 and 176. 4 via dual Wire (optional digital card request) and 96, 88. 2, 64, 48, 44. 1 or 32 kHz. I/O Connectors: XLR (2 Channels Aes/Ebu in) 3 x RJ 45 Proprietary TC Link. Format: AES/EBU (24 bit). Word Clock Input: BNC, 75OHM, 0. 6-10 VPP. Display: 2 x 16 character dot matrix. Operation: Menu System / Four Buttons. Input Connectors: XLR Balanced (pin 2+, pin 3-). Impedance: 10/3 k ohm (balanced/unbalanced). Selectable Full Scale Input Level: +9, +15, +21, +27 DBU. Dynamic Range:> 113 dB Typ. (Inweighted), BW: 20-20 kHz. Thd+n: <-105 db type. @ 1 khz, -3 dbfs. Crosstalk: <-120 dB, 20 Hz to 20 kHz. A to D Conversion: 24 Bit (Dual Bit Delta Sigma Sampling AT 4. 1/5. 6/6. 1/6. 1 MHz). I/O Connectors: 2 x RJ45 Proprietary TC-Link. Complies with: EN 55103-1 and EN 55103-2, FCC Part 15 Class B, CISPR 22 Class B. Certified to: IEC 60065, EN 60065, UL 6500 and CSA ESA E60065 CSA File #LR108093. Operating temperature: 32 ° F to 122 ° F (0 ° C to 50 ° C). Storage Temperature: -22 ° F to 167 ° F (-30 ° C to 70 ° C). Humidity: max.