This is a brand new item.
New goods including controls (front): Channel 1. 6 level. Input sensitivity controller, channels 1. 6. Channel 1+2, 3+4, 5+6 Bridge Mode (LED, clear). The channels 1+2, 3+4, 5+6 can be operated in bridge operation (bridge) with double output power. High Pass Filter / HPF. Each channel is equipped with a switchable, coordinable high-pass filter (20Hz. 90Hz). Use: e. g. impact sound filter. - Protection against deep frequencies (alising filter). - Prevention of transformers in 100V systems. Signal (LED, green): lights up when the input signal is available. Limit (LED, orange) shows the work of the integrated limit. Protect (LED, red). If the power amplifier is properly condition, switch the Speaker Protect Relay a few seconds after switching on. The protect ads go out at the same time. A lighting up during operation signals a fault. (Triggering the DC Protection). Equipment features SMP series. SMPS Power Supply Network - SMPS power supply. Current Liminer - Involving power limit. Voltage limit - voltage limitation. LoudSpeaker Protection - loudspeaker protection circuit. DC Protection - DC voltage protection. Over Current Protection - overflow protection. Thermal Protection Network - overheating protection circuit. Temperature controlled - fan cooling system - temperature -regulated fan system. Input level control (Ch. 1. 6)-Gain controller (channel 1. 6). DSC Processor on/Off W/LED - DSC processor on/off with LED. Main Switch W/LED indicator - network switch with LED display. LED indicators via channel: signal, limit, protect, DSC on - LED displays per channel: signal, limit, protect, DSC. Input/Link: XLR (M), XLR (F) - Balanced - Entrance/Link: XLR (M), XLR (F), symmetrical. Speaker Output Channel 1. 6: Terminal Clamps (5-way Binding Post)-Loudspeaker output channel 1. 6: Terminal clamps (5-way binding post). Stereo / Bridge Switch - Stereo / Bridge (Mono) switch. Ground Lift in/Out - Equipment separation on/off. Specifications: output output stereo (4 ohms): 200W x 6. Performance output bridge (8 ohms): 400W x 3. Frequency range: 10Hz - 40kHz. Signal rush ratio (SNR): 110dB. Input sensitivity: 1. 06V RMS / +2. 7dBu. Indicators: LED, protection in, limit display. Size (mm): 482x88x450 (W x H x D). Weight: 14kg.