This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
Dolby Lake LP8D8 Sound ProcessorIncludes :
Dolby Lake LP8D8
Flightcase with accessory drawer
2x Ethernet cable
2x Powercon cable
1x USB-RS485-XLR adapter
1x Socapex – XLR Fan-out
The Dolby® Lake® Processor marks the next generation in digital loudspeaker and equalization technology. With unsurpassed audio quality and the most advanced loudspeaker processing available, it will improve the sound of any system. Effortless control is provided through the Dolby Lake Controller software, or the exclusive front‐panel Portal metering and control interface.
The Processor platform offers complete, native‐digital signal processing functionality, with support for up to 4‐in, 12‐out loudspeaker applications and 8 in, 8‐out EQ applications. The signal processing can also be changed to provide an EQ 4×4 configuration together with a loudspeaker 2×6 configuration.
The Processor includes several advanced technologies for improving sound quality. These include Raised Cosine EqualizationTM (the foundation underlying the Ideal Graphic EQTM and Lake Mesa EQTM interfaces), plus linear phase crossovers, LimiterMaxTM loudspeaker protection, and Iso‐FloatTM ground isolation.
The Processor is complemented by the Dolby Lake Controller software interface. For more information on the Controller software, please refer to the Dolby Lake Controller Manual.
Specifications :
Audio Performance
Conversion Resolution : 24-bit
Internal Sample Rate : 96 kHz
Internal Data Path : 32-bit floating point
System Propagation Delay : <2 ms from any input to any output (analog or digital)
Maximum Available Delay : 2 s from any input to any output
Sample-Rate Converters
Operating Sample Rates : 44.1, 48, 88.1, 96 kHz
Resolution : 24-bit
THD + Noise : 0.00003% typical, 20 Hz to 20 kHz, unweighted
Dynamic Range : 140 dB typical, 20 Hz to 20 kHz, unweighted
Back-Panel Interface
Analog I/O Connectors : XLR
AES/EBU I/O Connectors : 25-pin D-connector, with selectable termination on pairs 1 and 2
S/PDIF I/O Connectors : Toslink™ optical
Word Clock Input : BNC with selectable termination
Ethernet : Auto 10/100, Auto Uplink: (2) RJ-45, (1) EtherCon®
Power : 3-pin IEC, 2 fuses T 1.5A L, 5 × 20 mm
Digital-to-Analog Outputs
Frequency Response : +0/–0.1 dB, 3 Hz to 20 kHz
THD + Noise : 0.0004% typical at 1 kHz, 0.00056% typical, 20 Hz to 20 kHz, unweighted
Dynamic Range : 113 dB typical, 20 Hz to 20 kHz, unweighted
Output Impedance : 50Ω
Maximum Output Level : +21 dBu
Crosstalk : –100 dB, 2 Hz to 40 kHz
Analog‐to‐Digital Inputs
Frequency Response : +0/–0.2 dB, 2 Hz to 20 kHz
THD + Noise : 0.00022% typical at 1 kHz, 0.00033% typical, 20 Hz to 20 kHz, unweighted at +21 dBu headroom setting
Dynamic Range : 116 dB typical, 20 Hz to 20 kHz, unweighted at +21 dBu headroom setting
Input Impedance : 20 kΩ balanced, 10 kΩ unbalanced
Maximum Input Level : +26 dBu
Input Sensitivity Settings for Digital Full-Scale : +10, +16, +21, +26 dBu
Common Mode Rejection : 65 dB, 20 Hz to 20 kHz, 75 dB typical at 1 kHz, 70 dB typical at 20 kHz
Crosstalk : –100 dB, 2 Hz to 40 kHz
Combined A/D and D/A
THD + Noise : 0.0005% typical at 1 kHz, 0.00063% typical, 20 Hz to 20 kHz, unweighted
Dynamic Range : 113 dB typical, 20 Hz to 20 kHz, unweighted
AES/EBU I/O and S/PDIF I/O
Supported Resolutions : Up to 24 bits
Supported Sample Rates : 44.1, 48, 88.1, 96 kHz
Dante
Supported Resolution : 24 bits
Supported Sample Rate : 96 kHz
Number of I/O channels : 8 input and 16 output channels