This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
- 1x tour case with Bluewheels and Doghouse including NP sum: approx. Detailed description: I offer my full-size x32 in the large case with a dockhouse. To try everything out, you can put the case alone, open and close and erect again. To raise it to a table or another case, you need 2 people. I integrated a 3 -way socket and a LED strip in the back of the dockhouse at the back of the desk, so that you can get the connections of the pulse in a dark environment. The X32 works perfectly, is about 8 years old. So far it has been good service on tour and in various situations. I unscrewed the cell phone holder (for a new iPhone 3G at that time). There are also 3 stabox SD8, each with 8 entrances and outputs. The cold device cables are equipped with angular plugs and were made very briefly for our purposes. If you prefer to take "normal" cold device cables, I can also add them to you. The 3 stabilizers can be connected entirely in series. I can also help you with the patch. There is also an X32 core with a router in the case. This is very helpful to create your own in-ear mix, regardless of the large desk. Each musician can then use an app (or one of the P16 modules) to control their own mix without intervening in the FOH mix. Now comes the last part of the bundle, which is 4 modules P16-M. With these you can access 16 channels (e. g. mixed buses, etc. ) via a simple, shielded CAT line, all without a separate power supply, since the P16-M modules are operated with POE (Power Over Ethernet). Unfortunately, the Pan potentiometer has broken off at one of the modules, which can certainly be easily repaired. I do not offer a CAT connection that connects the desk with the X32 Core and the Core with the Staboxes, as well as the stabilic with each other. To do this, you would have to take at least one shielded Cat5e cable separately. These are relatively cheap to acquire from all large musical dealers. If you need tips for this, I will be happy to help you. The set, as it is here, is fully functional and was in use at several concerts. Accordingly, there are of course usual signs of wear. Any equipment was always professionally packed in cases and bags. The complete setup looked so that we connected the instruments to the three SD8 stabilizers on stage, switched to series and thus went to the X32 Core on stage. So we were able to create our in-ear mix with the P16-M modules on stage from the stabilizers without electricity. From the X32 Core we went forward to the FOH to our FullSize X32 mixer, in which all signals from the stabilizers could then also be operated separately. Everything can also be tested and examined there. Payment then also likes to go to cash.