This is a used / pre-loved item, we do our best to uphold the quality of all our used equipment.
20PCs Meyer Sound Mica 2x10 " / 2x3" Compact High-Power Curvilinear Array LoudSpeakers. 5PCs Meyer Sound McF-Mica Caster Frame for Stacking of Up To Four Mica Cabinets. 5PCs Meyer Sound PC4-Mica Pull Cover for 4 LoudSpeakers. 2PCs Meyer Sound MG-Mica Multipurpose Grid. Mica is a self-powered, Three-Way Loudspeaker Designed for Vertical Curvilinear Arraying. A member of the milo family of high-power curvilinear array loudspeakers, the mica loudspeaker is ideal for applications that do not require quite as much power and throw distance as milo and where weight and size is a concern. The Mica Compact Highpower Curvilinear Array LoudSpeaker is equally applicable in a wide variety of application search as touring, rental and fixed installations. The loudspeaker provides very high acoustic output, with a single mica producing a peak output of 138 db SPL at one meter. High output combes with exceptionally flat phase and frequency response over a wide operating range of 60 Hz to 18 kHz. Mica’s Frequency Response, with its extended high-frequency Characteristics, is Quite Compatible with Milo in Applications Where Both LoudSpeaker Types Are used. The Mica Low/Low-Mid Section Features Two High-Power, Neodymium Magnet 10-inch Cone DRIST WITH 2-Inch Voice Coils, Especialy Designed for the Power Capability of the System. Both Drivers Are Housed in separate Vented Enclosures WithesLeft and Right Sides. The Two High-Power 10-inch Drivers Work in Tandem at Lower Frequencies to Take Advantage of their Combined Acoustic Output, While One Of The Drivers Rolls Off Before The Crossover Frequency to Mainain Optimal Polar and Frequency Response. The high-frequency section-at the center between the Two Cone Drivers-Consists of Two Neodymium Magnet Compression Drivers With 3-inch Diaphragms and 1. 2-inch Exits. Thesis Newly Designed Drivers are Seamlessly Combined Through a Custom, Patented Meyer Sound Rem Ribbon Emulation Manifold, Coupled to a 100-Degree Horizontal Constantdirectivity Horn. This horn’s controlled, very Narrow vertical dispersion is idally suited for use in curvilinear arrays, allowing minimal destructive interaction in the high frequency between adjacent enclosures. Compared to other Methods, Rem Produces A Smoothly Controlled Wavefront with Less Distory and with the Far Higher Output Generated by Compression Drivers. All four mica transducers are designed and manufactured in-house, and are drives by an integral, four-channel class from/h amplifier that provides 3020 watts of total output power (6000 watts peak). The Integrated Amplifier/Processing Circuitry Includes Trupower Limiting to Protect the Drivers and Hold Long-Term Power Compression to Less than 1 DB. The field-replacable electronics modules incorporates meyer sound’s intelligent ac power supply, which automatic shines for any line voltage world and provides do soft turn-on and transient protection. The Mica Loudspeaker Comes with the RMS Remote Monitoring System Interface Installed. RMS Offers Comprehensive Monitoring of System Parameters on a Windows-Based Network. Mica Systems May Be Deployed in Ether Flown Or Ground-Stacked Configurations. Newly designed quickfly rigging hardware uses captive guidealinks contained within recessed guides in the Front and Rear Corners of the Cabinet. A slot and convenient pinned handle allow the link to be moved and pinned for arraying or storage. The Rear Link Permits 10 Splay Angles Between 0 and 6 Degrees (in 0. 5-Degree Increments from 0 To 3 Degrees, and in 1-Degree Increments from 3 To 6 Degrees), The Two Position Front Link May Be Set To Add 7 Degrees, Adjusting Coverage and Other ArchitecturalObstacles. The Rigid Connections Allow Easy Adjustment of Array Tilt, and Often Eliminate the Need for A Pullback Strap in Flown Configurations. A single flown array can included up to 22 mica loudspeakers with 7: 1 Safety Factor, and 25 Loudspeakers with 5: 1 Safety Factor. *. Options for Mica Include A Weather-Protected version with a rain hood to Safeguard the Electronics, and Custom Color Finishes. Top and Transition Grids, A Caster Frame for Transporting Stacks of Multiple Units, and Protective Covers Are Available. *Restrictions APPLY, Lake the MG-Mica Assembly Guide for more information. Features & Benefits. Very high power-to-size ratio. Exceptional Fidelity and Transient Response for Intelligibility and Highimpact. Seamless Integration with Milo. Wide and even Horizontal Coverage Pattern Across the Full Bandwidth. Quickfly Rigging System with New Captive Guidealinks Simplifies Use in Flown Or Ground-Stacked Arrays. Applications. Performing Arts Centers, Theater, Churches, and other fixed installations. Touring Sound Reinforcement for Midsized Venues. Sidefill Hangs with Milo in Very Large Venues.